Moisture Balance
- Equipped with the UniBloc aluminum block, to provide accurate moisture measurements.
- Equipped with a high output halogen heater capable of rapid heating.
- Wide observation window to allow checks of sample status during heating.
- 60 g capacity/0.001 g minimum display
- The temperature on the pan can be set between 50 ˚C and 200 ˚C.
- Liquid and paste samples can also be measured using fiberglass sheets.
KLS-411 Karl Fischer Titrator
ZDY-502 type constant moisture titrator is equipped with a leakproof liquid device and a waste liquid bottle anti-suction device. Full automatic liquid injection, liquid discharge, KF reagent mixing and automatic cleaning function, anti-titration cup solution overflow protection function; Prevent users from direct contact with KF reagents to ensure the safety of measuring and using staff and the environment.
WFX-220A/B AAS
- Intelligent feedback detection technique, real-time monitors the lamp current and protects the hollow cathode lamps.
- Easy changing emission burner for easily ionized elements such as K, Na, etc., with linear range 3 times that of normal flame.
- High precision mass flow controller and stable electronics in flame system control the fuel flow accurately. Temperature control protection system with dual air circuit breakers in GF system to effectively prevent current overload or abnormal temperature rise.
- 8-lamp turret with automatic change and optimization supports 1 working lamp and 7 preheating lamps in the same time.
- Hamamatsu’s high performance PMT as the detector.
- Molding PPS spray chamber has high chemical stability, withstanding high temperature and strong acids etc..
SupNIR-2700 Near Infra-red Analyzer
SupNIR-2700 series is infrared analyzing equipment; it uses Holographic digital grating and high sensitivity InGaAs detector (TEC constant temperature cooling). The sample is analysis is based on the diffuse reflection model, and the wavelength range covers 1000-2500 nm. With the help of computer software called RIMP, particles, flakes, powder samples, chemical components are rapidly detected while not affecting their chemical and physical composition. To carry out a test, all that is needed is to place the sample on the tray, click the ‘measure’ button, and automatically perform the analysis. It is widely used in feed production, grain and oil processing, breeding research, and other fields.
NR100 Precision Colorimeter
- Built-in white plate parameters. No need to calibrate each time which realize rapid measurement.
- Double Apertures: Φ8mm flat aperture and Φ4mm tip aperture for switch, easy to measure concave sample in large plane.
- Equipped with rechargeable built-in high-capacity Li-ion battery. No need to purchase battery repeatedly.
- Handheld design: small and convenient; make the measurement easier.
- Exquisite appearance: adopts traditional and fashionable aesthetic designs.
- High cost performance: large output, good quality, cheap products.
Techcomp UV2500
- Wavelength Range: 190 - 1100nm
- Spectra Bandwidth: 1.5nm
- Touch screen operation on main unit
- PC Software Control (optional)
- Comprehensive measurement functions
- Powerful function for data storage. SD card storage can be extended unlimitedly
- GLP/GMP wizard, self-diagnostic and calibration functions as standards
Fiber Analyzer
Hanon F800 Fiber Analyzer is with advanced design, easy operation and flexible application. It can be used in the conventional Weende method to analyze crude fiber and Van Soest analysis to wash the fiber. Applies to plant, feed, food and other agricultural products as well as the determination crude fiber, neutral detergent fiber (NDF), acid detergent fiber (ADF), hemicellulose and acid detergent lignin (ADL).
Fat Analyzer
SOX406 Fat Analyzer is based on the Soxhlet extraction principle and integrates such functions as soaking, extraction, leaching, heating, condensation, and solvent recovery. It features sealed metal bath heating with automatic temperature control, ensuring uniform heating and safe operation; six samples can be tested at the same time, and optimal temperature can be selected according to the difference between reagent boiling point and ambient temperature to achieve quick analysis; reagents can also be recycled to reduce test cost; and soaking, extraction and solvent recovery can be done in one step. Therefore, this device is characterized by reasonable design, stable performance, good reproducibility, high accuracy, easy operation, saving time and effort, and so on.
Soxhlet Extractor
SOX606 Automatic Soxhlet Extractor is based on the Soxhlet extraction principle with weight method to determine the fat content. It has five extraction methods to meet different demands from the customer. The whole metal heating module, heats up fast, good effect, low power consumption; access to all-round water temperature, flow control, environmental protection more economical; built-in ether leak detection device to ensure experimental safety.
Widely used in agricultural/ food /chemical /environment and other areas, especially for the drug, soil, sludge, cleaner, and other substances in the extraction of soluble organic compounds.
Texture Analyzer
- Choice of five load ranges up to 50kg
- A variety of probes and accessories for new application opportunities
- Choice of two adjustable base tables allows for for versatility of sample testing
- Six available test modes plus a calibration check
- Stores up to 10 additional customized test methods
- Easy-to-read display and easy-to-use, intuitive controls
- Texture Profile Analysis (TPA) specific for the Food Industry
- Gelatin Bath System available for sample conditioning
Brookfield Viscometer
- Low cost and easy to use
- Direct display in: cP or maps, % Torque, Spindle, and Speed
- Torque measurement accuracy: 1% of full scale range
- Repeatability: 0.2% of full scale range
- Compatible with all Brookfield accessories
- NIST traceable viscosity standards available
- 18 speeds for greater range capability (0.3 to 100 rpm)
Automatic Kjeldahl Analyzer
K9860 Automatic Kjeldahl Analyzer is an automatic device integrating distillation and titration functions, which is designed based on the classic Kjeldahl nitrogen determination method. It's equipped with the latest core control system, powerful automatic degree and high-quality components and it can easily achieve automatic cleaning of digestion tubes and titration cups, control steam supply, and have real-time detection of condensation temperature. High-accuracy charging pump and titration system ensure test results accuracy, and multiple fluid level detection gives a smooth test process.